Alinco DJ-100T

Expand Reception Range

Procedures:

1. Remove battery and antenna.
2. Remove case attach screws and open unit.
3. Locate and cut -2- jumbers per drawing.
4. Clip pin #2 of IC401 (S7116A), just above circuit board
   and bend out.
   Solder a short length of wire-wrap wire to the bent out IC leg
   and soolder.  Connect the wire wrap to pin 14, for SIMPLEX PL tone.
4. Re-assemble in reverse order.
5. Reset Microprocessor.

   ------------------------
   |                      |
   |      -----------     |
   |      | 1 2 3 a |     |
   |      | 4 5 6 b |     |       7                       1
   |      | 7 8 9 c |     |        _______________________
   |      | * 0 # d |     |       |                       |
   |      -----------     |       |                       |
   |                      |       |       S7116A         [|
   |                      |       |                       |
   |                      |       |-----------------------|
   |                      |
   |                      |       8                       14
   |                      |
   |           o  o       |
   |  Cut--->  |          |
   |           o  o       |
   |                      |
   |           o--o       |
   |             ^        |
   |             |        |
   |            Cut       |
   |----------------------|