Alinco DR-110T

Expand Reception Range

Procedure:

1. Remove power and antenna.
2. Remove case screws and open unit.
3. Cut YELLOW wire on control board.
4. Re-assemble in reverse order.
5. Reset microprocessor by turning power on, then while holding down "F"
   and VFO/M buttons, turn power off, and with buttons still down,
   turn poer ON, then release buttons.

   -------------------------------------
   |   |                               |
   |   |--\     <---Cut Yellow Wire    |---
   |   |--|                            |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |   |
   |   |                               |---|
   |   |                               |
   |---|-------------------------------|