**********************************************************
              Expanding rx frequency range:
**********************************************************

By keyboard only:

        Press SET end DTMF keys simultaneously while
        turning ON the power switch. Hold the keys a few
        seconds.

By means of diode EUR version:

        Remove the D13 diode on the logic unit.

For ITA version:

        Remove D8 will open AIR band only.
        Remove D9 will open 430 and 800 MHz bands
        Cut W1 jumper open all bands.

RX frequency range is now:

        118.000 - 135.995 MHz (AM) (VHF section only)
        136.000 - 174.000 MHz
        320.000 - 479.000 MHz
        830.000 - 999.990 MHz      (UHF section only)

**********************************************************
              Expanding the TX frequency range
**********************************************************

- 144 MHz band only: Remove diode D17 on the logic unit.
- 432 MHz band only: Remove diode D16 on the logic unit.
- All bands:         Remove chip-jumper W2 on logic unit.

**********************************************************
              Restricting frequency range
**********************************************************

When diode D7 is present the RX and TX frequency is
limited to 144 - 146 MHz and 432 - 438 MHz provided none
of the above mods have been made.

**********************************************************
              Cross Band Repeater
**********************************************************

Removing D14 will allow use of cross band repeater and
DTMF remote control functions.

Activate "hang up time" type repeater:

        Push the VHF and UHF main knobs and the SET/LOCK
        key for more than one second.

Activate "no hang up time" type repeater:

        Push the VHF and UHF main knobs and the SET/LOCK
        and DUP keys simultaneously for more than one
        second.

To return to normal mode, press SET for more than one
second.

**********************************************************



==========================================================
This mod from: ftp.cdrom.com - has been slightly modified.
==========================================================



Hi there! From Icom USA comes this mod sheet for the 2700H:
 
RX Expansion Modification
=========================
1.  Remove Top Cover. (6 Screws)
2.  Remove Bottom Cover. (6 Screws)
3.  Remove Front Display. (4 Screws)
4.  Locate the Logic Board.
5.  Remove W1 from the logic.
6.  Hold [SET], [SPCH] and turn radio on.
 
Expanded Frequency Range
 
AM Mode   118-136 MHz
FM Mode   138-174 MHz
          350-470 MHz
 
Tx Expansion Modification
=========================
1.  Remove D16 and D17
2.  Hold [FUNC], [A], [CLR] and turn the radio on.
 
FM Mode   138-174 MHz
          350-470 MHz