OUT OF BAND RECEIVE MODS

                     FOR THE IC-901


To modify your IC-901 for out of band receive on each of the bands remove 
the following diodes in the control head.

              28 MHz            D24
              50 MHz            D28
             220 MHz            D19
             430 MHz            D25



              TO ENABLE CROSS BAND REPEAT

Flip S1 on the logic board (located in main unit at the very front)

Dial up the frequency you need on the main and sub band

Turn off the IC-901

Push and hold "Check" and "Lock"

Turn the power to the IC-901 on


To disable the cross band repeat function depress the "Lock" button