==============================================================================
                             K E N W O O D
   >>>   A M A T E U R   R A D I O   S E R V I C E   B U L L E T I N   <<<
==============================================================================

                        Kenwood Service Centers

   Kenwood Service Corporation             Kenwood Service Center, East
   2201 East Dominguez Street              829 Lynnhaven Parkway, Suite 130
   Long Beach, California 90801            Virginia Beach, Virginia 23452
   Telephone 1-310-639-5300                Telephone 1-804-340-1702

==============================================================================

BULLETIN # 837
MODEL: TS-830S
SUBJECT: OPARTION ON 240 VOLTS
                                                            
    To operate the TS-830S on 240V AC, the power transformer
    split primaries must be rewired from parallel to series
    connection
    
    1. Unplug the AC power cable.
    
    2. Remove the bottom cover.
    
    3. Remove the jumper wires between the two 0 terminals and
       two 120 terminals on the bottom of the power transformer.
       
    4. Connect the adjacent 120 and 0 terminals at the middle
       of the transformer. This will provide 240V AC operation.
       
       For 220V AC operation, connect the adjacent 100 to 0
       winding.
       
    5. Change the AC fuse from 6A to 4A. Tag the power cord at the
       back of the radio to indicate that the transformer is
       strapped for 240V AC, and the power fuse should be 4A, and
       not 6A.
       
     6. Replace the bottom cover and reconnect power to verify
        your work.