==============================================================================
                             K E N W O O D
   >>>   A M A T E U R   R A D I O   S E R V I C E   B U L L E T I N   <<<
==============================================================================

                        Kenwood Service Centers

   Kenwood Service Corporation             Kenwood Service Center, East
   2201 East Dominguez Street              829 Lynnhaven Parkway, Suite 130
   Long Beach, California 90801            Virginia Beach, Virginia 23452
   Telephone 1-310-639-5300                Telephone 1-804-340-1702

==============================================================================

BULLETIN # 876
MODEL: TS-930S
SUBJECT: RF FEEDBACK INTO MIC CKT

Some users may report RF feedback to the MIC at low frequencies, 
for example: 3.5 Mhz.

Make the following changes to SW unit (J) (X41-1410-00):

CHANGE C8 FROM A .01uf TO A .047 uf CAP.

ADD A FERRITE BEAD TO THE MCG LINE (PIN 7) OF THE MIC JACK BY CUTTING 
THE TRACE AND SOLDERING THE BEAD AND WIRE TO THE BOARD.

Note: This change is applicable to units before S/N 308XXXX.