GENERAL ELECTRIC MINI II

NOTES:  This is a dual NAM portable unit.
        The ESN prefix is 134 decimal, 86 hex (Mitsubishi)
        See file MITSTEST.TXT for test mode information.
        General Electric: 1-800-528-7711

NAM PROGRAMING:

1.  Press PWR key for one second to turn power on.

2.  Wait for wake up cycle to finish & display to clear.

3.  Within ten seconds press and hold the END key while entering
    6 2 8 2 9 0 5.

4.  Press SEND to store data and increment the step number.

5.  Press END to complete programing and exit at any time.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY             DESCRIPTION

01       0 OR 1              DUAL NO             DUAL NAM
02       10 DIGITS           NO1                 MIN (AREA CODE & TEL#)
03       00000 - 32767       SID1                SYSTEM ID
04       0 OR 1              LU1                 LOCAL USE MARK
05       0 OR 1              EX1                 EXTENDED ADDRESS MARK
06       0333 OR 0334        IPCH1               INITIAL PAGING CHANNEL
07       2 DIGITS            ACCOLC1             ACCESS OVERLOAD CLASS
08       0 OR 1              PREF1               PREFERRED SYSTEM (0=B,1=A)
09       2 DIGITS            GIM1                GROUP ID (10 IN USA)
10       0 OR 1              RI1                 ROAM INHIBIT
11       0 OR 1              DTX1                VOX MODE
12       0 OR 1              AR1                 SYSTEM AUTO REDIAL

If you entered "0" in step 01 go to step 24

2ND NAM DATA:

13       10 DIGITS           NO2                 MIN (AREA CODE & TEL#)
14       00000 - 32767       SID2                SYSTEM ID
15       0 OR 1              LU2                 LOCAL USE MARK
16       0 OR 1              EX2                 EXTENDED ADDRESS MARK
17       0333 OR 0334        IPCH2               INITIAL PAGING CHANNEL
18       2 DIGITS            ACCOLC2             ACCESS OVERLOAD CLASS
19       0 OR 1              PREF2               PREFERRED SYSTEM (0=B, 1=A)
20       2 DIGITS            GIM2                GROUP ID (10 IN USA)
21       0 OR 1              RI2                 ROAM INHIBIT
22       0 OR 1              DTX2                VOX MODE
23       0 OR 1              AR2                 SYSTEM AUTO REDIAL

24       4 DIGITS            SEC                 SECURITY CODE
25       0 OR 1              EE                  END TO END (DTMF) DIALING
26       0 OR 1              C TONE              CONTINUOUS DTMF
27       0 OR 1              AL                  AUTO LOCK
28       0 OR 1              BEEP                CALL TIMER AUDIO BEEP
29       0 OR 1              BO                  3 WATT BOOSTER OPTION

NOTES:

Install lock code with phone out of programing mode, enter FCN 7 SSSS
LLL CLR, where SSSS is the security code and LLL is the new lock code.

LOCK: F 2.  UNLOCK: Enter three digit code, press SEND.

SYSTEM SELECT: F 1 displays current then press one of the following to change:
0 = Pref/non pref, 1 = Non pref/pref, 2 = Home only, 3 = Pref only, 4 = Non
pref only.