Ranger AR-3300 & AR-3500 Low Frequencies       
                                 
                                 2.9 to 30 Mhz

  PROGRAM 1
  1---Program any one freq. into memery not to exceed 4 chs. into memory
  2---Push manual
  3---Push enter
  4---Push 10k down
  5---Push enter
  6---Push memory, freq. display will read 2.933.0 
  7---Push 1K up
  8---Push 1 Meg. up slowly until display reads 24.450.0 
  9---Push enter
  10--Push 100Hz + or -
  11--Push enter
  12--Push memory
  13--Push manual
  14--Push scan prog.
  15--Push 10K up
  16--Push enter twice
  17--Push 1 Meg. up twice, display will read 26.450.0 
  18--Push enter..........END OF PROGRAM!!!
  You must use scan up or down to obtain frequencies, you can use the squelch 
  button for auto scan or squelch off for manual stepping. Unit will now 
  transmit from 24.850 (approx) to 30 Mhz.
  
    

  PROGRAM 2
  TO scan freqs. from 2.933.0 to 27.933.0, do the following.
  1---Enter any 1 freq. into memory
  2---Push manual
  3---Push enter
  4---Push 10K down
  5---Push enter
  6---Push memory, display will read 2.933.0
  7---Push manual
  8---Push scan prog.
  9---Push 1K up
  10--Push enter twice
  11--Push 1 Meg. up until display reads 27.933.0
  12--Push enter..............END OF PROGRAM.!!!
  It will now scan freqs. 2.933.0 to 27.933.0
                 
   ATTENTION!!!--------This conversion may not work on some AR-3300's.


  PROGRAM 3
  1---Program any one freq. into memory not to exceed 4 chs. into memory         
  2---Push manual
  3---Push enter
  4---Push 10K down
  5---Push memory, freq. display will read 2.933.0
  7---Push 1K up, display will read 3.450.0
  8---Push enter
  9---Push 100Hz + or -
  10--Push enter
  11--Push memory
  12--Push manual
  13--Push scan program
  14--Push 10K up
  15--Push enter twice
  16--Push 1 meg up until you reach desired freq. for upper limits,ie;
      29.450.0, Once you have reached the megahert for upper limit, you
      may enter exact freq. by any of yhe control buttons, 100Hz, 1K,    
      10K, etc., Example; you may want desired freq. 29.990.0 or 28.505.5
  17--Push enter..............END OF PROGRAM !!



               This is for Ranger that has not been converted.

              Obtaining 26.965 to 27.405 ( CH. 1 to 40 )


  1---Enter any freq. into memory not to exceed 4 memories
  2---Push manual
  3---Push enter
  4---Push 10K down
  5---Push enter
  6---Push memory. Freq. will read 2.933.0
  7---Push 1K up. Freq. will read 3.450.0
  8---Push 1Meg. up until freq. reads 24.450.0
  9---Push 1K up 3 times SLOWLY. Freq. will read 26.965.0
  10--Push enter
  11--Push 1K up
  12--Push enter twice
  13--Push manual
  14--Push memory
  15--Push scan program
  16--Push 100K up
  17--Push 10K down 6 times
  18--Push enter...........END OF PROGRAM !!
      To obtain reg. 40 channels push scan up or down to begin program.


  NOTE !!!  Do not try to go beyond upper or lower limits. If you do,
  program will lock up and you will have to set reset button and
  re-program entire program !!!



                        12 Meter Through 10 Meters

            This is for Rangers that have already been converted.

  1---Push manual
  2---Push enter
  3---Push 10K down
  4---Push enter
  5---Push memory
  6---Push 1K up
  7---Push 1 Meg. until you reach 24.450.0
  8---Push enter
  9---Push 100Hz up
  10--Push memory
  11--Push manual
  12--Push scan program
  13--Push 10K up
  14--Push enter twice
  15--Push 1 Meg. to freq. 26.450.0
  16--Push 10K down to 26.050.0
  17--Push enter.........END OF PROGRAM !!!!
      Unit will go from 24.450 to 26.050 by using scan up or down.
      Then use regular conversion for 26.000.0 to 30Mhz.




                        TO CONVERT FROM 26.000 TO 29.999

     Take cover that has speaker on it off. With front of radio facing
     you. Look for 3 pins together at the front on the main broad. Short
     the 3 pins together.


                                BACK
                     |------------------------------|                                      
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |                              |
                     |             3PINS            |
                     |              ...             |   
                     |------------------------------|
                                FRONT