CLEAR ALL CHANNELS IN YOUR COBRA OR UNIDEN/BEARCAT SCANNER
 
                     by Bob Parnass, AJ9S
 
   According to the Uniden/Bearcat 200/205XLT Service Infor-
   mation  Manual, the following procedure will zero all 200
   channels, then load channels 1-25 with various test  fre-
   quencies.
 
    1.  Press and hold three keys: 2, 9, and MAN  simultane-
        ously and turn the power switch on.
    2.  Set the power switch to the off position.
    3.  Repress and again hold three keys: 2,  9,  and  SCAN
        simultaneously and turn the power switch on.
 
   Some of the frequencies will be out of range, like  108.5
   and 66.45 MHz, but will not permit reception.
 
   This procedure works on other  models  as  well.   Harold
   Wong  tried  it  on his 100XLT.  I tried it on my 760XLT,
   Bill Vojak tried it on his Cobra SR-15,  and  Mark  Smith
   tried it on his Bearcat 70XLT.  We all met with success!
--
============================================================================
Bob Parnass, AJ9S - AT&T Bell Laboratories - att!ihuxz!parnass (312)979-5414