JANUARY 1, 1993
TO:RUDY WB5UUK
FROM: ROGER WB0GAI
RE: 9600 BAUD MODS

DEAR RUDY,
     THIS LAST YEAR I MODIFIED MY YEASU 726R TO WORK WITH THE AEA
DSP-2232 FOR 9600 BAUD. I HAVE BEEN USING IT FOR SEVERAL MONTHS WITH
GOOD SUCCESS.

     I FOUND THAT ON RECEIVE, THAT HOOKING DIRECTLY TO THE ANODE OF 
DIODE D04 ON THE RX UNIT THAT I HAVE VERY GOOD RESULTS.

     ON THE SAT UNIT I FOUND THAT LOCATION C25 ON THE + TERMINAL I 
WAS ABLE TO GET AN OPTIMUM SIGNAL INTO THE SATELLITES. 

     OF COURSE I USED SHIELDED CABLE AND GROUNDED EVERYTHING CAREFULLY.
PTT IS THE SAME AS ALWAYS, AT THE BACK OF THE RADIO AND AT THE MIC CONNECTOR.

     THAT IS ABOUT IT. IT TOOK AWHILE. ONE THING TO EMPHASIZE IS THE IMPORT-
ANCE OF HOOKING THE TRANSMIT CONNECTIONS TO THE SAT UNIT AND NOT TO THE TX 
UNIT. WHEN YOU GO INTO THE SAT UNIT THE TX UNIT IS OUT OF THE LOOP MORE OR
LESS.

73'S AND GOOD LUCK,
DE ROGER WB0GAI