Tech Brief No. 11 Using the DS1075K Development Kit to Program SOIC and TO-92 Packages Bob Brown, Product Manager, EconOscillators |
||
Programming with: |
The DS1075K Development Kit[1075k.pdf - MISSING] comes with a board populated with an 8-pin DIP socket for the 300-mil DIP package. The printed circuit board has pads for installing sockets for the 8-pin SOIC package and for a 3-pin TO-92 package. Figure 1 shows the two socket positions. |
Programming With the SOIC Package To program EconOscillators in the 150-mil SOIC package, first locate the J5 socket position. This pad is designed to accept an Enplas OTS-8 (16) -1.27-01 socket. Installing this socket will allow the user to evaluate and program any of Dallas' EconOscillators packaged in the 150-mil 8-pin SOIC package. Programming With the TO-92 Package The development board in the DS1075K can also be used to program EconOscillators in TO-92 packages. The board has a socket position (J4) ready to accept a CTI 499-030-00 socket. Once installed, the socket allows easy evaluation and programming of DS1065 EconOscillator devices in TO-92 packages. Certainly using the specified TO-92 socket is recommended, but if no socket is available you can still program the DS1065 using the existing DIP socket on the board. Pins 1, 3 and 4 on the DIP socket correspond to Pins 1, 2 and 3 respectively of the DS1065. To avoid bending the pins of the DS1065, the Zero Insertion Force (ZIF) socket can be inserted into the DIP socket on the board as shown in Figure 2. We recommend adding a ZIF socket even for programming DIPs to prevent premature wearout of the supplied socket on the board. |