PRO-26 Portable 200-Channael Scanner
(200-0506) Hints and Tips Faxback Doc. # 15614
The Hyperscan/Priority button works as follows:
When the Priority button is pushed, you can select a priority channel
that will be scanned every two seconds. The Hyperscan feature is
turned off. If you push the Priority button again, the Hyperscan
feature is enabled, which will allow scanning of up to 50 channels per
second. The Priority feature is off. When the scanner is in the
Priority mode, the PRI will appear. In the Hyperscan mode the PRI
will disappear.
This unit will only hyperscan in the 5 kHz step mode; if the hyperscan
button is pressed when the unit is in 12.5 kHz step mode, it will beep
to indicate that hyperscan is not possible.
(IR/ir-12/20/95)
Privacy Policy