PRO-2002 AM/FM Scanning Receiver
(200-0116)                 Error Indications          Faxback Doc. # 18980

Sometimes when you try to enter a frequency for a channel or as a Search
range limit, you may find an Error on the Display.  This means the
frequency is in error and you won't be able to enter it into your PRO-2002.

Such frequency errors usually mean you've entered a frequency outside the
ranges your PRO-2002 operates on (such as 225.00 MHz) or you've put the
decimal point in the wrong place (14.682 MHz instead of 146.82 MHz.  Check
carefully to find your mistake and then press CLEAR.  You can now enter the
correct frequency.

In case you're wondering...

... the tuning range of your PRO-2002 is permanently stored in the
microprocessor chip.  There's no way it can be extended or altered-even by
a skilled electronics technician.  So if you try to enter a frequency not
in the PRO-2002's tuning ranges, you'll get an error message every time! 
To listen to CB, shortwave or broadcasting bands, you'll need another
receiver designed for that purpose (like our famous DX-302 shortwave
receiver).


(/all-02/14/96)

Privacy Policy