PRO-2036 200-Channel Home Scanner
(200-0412) Troubleshooting Faxback Doc. # 19822
If your scanner is not working as it should, these suggestions might help you eliminate the problem. If the scanner still does not operate normally, take it to your local Radio Shack store for assistance.
SYMPTOM SUGGESTION
Scanner is on but will not Be sure SQUELCH is adjusted properly.
scan.
Be sure SCAN is displayed. See "Scanning
the Channels."
Scanner does not work at Check the AC adapter and AC outlet.
all.
Scanner locks on frequencies Be sure "Birdie" frequencies are not pro-
that have an unclear trans- grammed, or listen to "Birdie" frequencies
mission. Manually. See "Birdie Frequencies" in
"Guide to Frequencies".
Memory not holding after The memory should hold for approximately
being unplugged. five years. Make sure that the unit is
plugged in for at least 24 hours before
unplugging. If it still loses memory, send
it to service.
Scanner is locked up and all Reset the scanner as follows:
lights are on. 1. Turn off the scanner.
2. Set ENTER/LOCK to Off.
3. Press and hold 2, 9 and E.
4. While holding these keys, turn Power on.
(IR/EB 02/29/96)
Privacy Policy