PRO-51 200-Channel Programmable Scanner
(200-0308)                 Operation                  Faxback Doc. # 31135

Resetting the Scanner

1.  Turn off the scanner.

2.  While you press and hold down the 2 and 9 keys, turn on the scanner.


Programming Channels

1.  Press MANUAL.  Enter the channel number you want to program.

2.  Press PROG.  PGL appears on the display to indicate the scanner is in
    the programming mode.

3.  Enter a frequency.

4.  Press ENTER to store the frequency.

5.  Repeat Steps 1-4 to program more channels.

Limited Search Operation

1.  Press MANUAL.

2.  Press PROGRAM.

3.  Press LIMIT.  LO appears on the display.

4.  Enter lower Frequency limit desired.

5.  Press ENTER.

6.  Press LIMIT.  HI appears on the display.

7.  Enter desired high frequency to search.

8.  Press ENTER.

9.  Press /\ or \/ to start searching up or down the frequency scale.


(IR/EB 04/04/96)

Privacy Policy