PRO-100 Communications Headset
(200-0282)                 Operation                  Faxback Doc. # 38972

1.  Turn down the volume on your sound source.

2.  Rotate the volume control on the left earpiece clockwise to its minimum
    position.

3.  Plug the headset into a 1/8 Inch headphone jack.

NOTE:  If you are connecting the headset to an audio source that has a 1/4
       Inch jack, use the supplied 1/8 Inch to 1/4 Inch adapter.

4.  Put on the headset and adjust the headband for a comfortable fit.

5.  Set the sound source's volume to a mid-range level.  Then adjust the
    volume control on the left ear piece until you reach a comfortable
    listening level.

Listening Safely

To protect your hearing, follow these guidelines when you use this headset.

Set the volume to the lowest setting before you begin listening.  After you
begin listening, adjust the volume to a comfortable level.

Do not listen at extremely high volume levels. Extended high volume listen-
ing can lead to permanent hearing loss.

Once you set the volume, do not increase it.  Over time, your ears adapt to
the volume level, so a volume level that does not cause discomfort might
still damage your hearing.

Traffic Safety

Do not wear this headset while operating a motor vehicle or riding a bi-
cycle. This can create a traffic hazard and could be illegal in some areas.


(EB 4/16/97)

Privacy Policy