PRO-44 Programmable Scanner
(200-0304)                 Display/Keyboard           Faxback Doc. # 39621

Understanding Your Scanner

A Look At The Display

The display has several indicators that show the scanner's current operating
mode.  A quick look at the display will help you understand how to operate
your scanner.

     SRCH - Appears during a search.

/\ and \/ - Indicate the search direction.

     SCAN - Appears when you scan channels.

      PGM - Appears while you program frequencies into the scanner's
            channels.

      L/O - Appears when you manually select a locked channel.

      MON - Appears when you listen to a monitor memory.

      DLY - Appears when you program a channel for a two-second delay before
            scanning or when you listen to a channel you have programmed
            with the delay feature.

        B - Appears when you need to replace or recharge the batteries.

A Look At The Keyboard

Your scanner's keys might seem confusing at first, but a quick glance at
this page should help you understand each key's function.

    KEYLOCK - Disables the keypad to prevent accidental program changes.
              Does not lock out the SCAN, MANUAL and LIGHT keys.

       SCAN - Scans through the programmed channels.

     MANUAL - Stops scanning and lets you directly enter a channel number.

  /\ and \/ - Used during frequency searches.  See "Searching For Active
              Frequencies".

      L/OUT - Lets you lock out a selected channel.

      CLEAR - Clears an incorrect entry.

      LIGHT - Turns on the display light while you press it.

        PGM - Programs frequencies into channels.

NUMBER KEYS - Enter a channel number or a frequency.
      (0-9) 

      0/MON - Enters a zero or accesses the monitor memory.

      ./DLY - Enters the decimal point necessary when programming frequen-
              cies, or programs a two-second delay for the selected channel.

      ENTER - Enters frequencies into channels.


(EB 5/19/97)

Privacy Policy