PRO-2043 30-Channel Direct Entry Programmable Scanner
(200-0415) Controls and Display Faxback Doc. # 47682
UNDERSTANDING YOUR SCANNER
A LOOK AT THE FRONT PANEL
A quick glance at this section should help you understand each control's
function.
VOLUME - Turns the scanner on or off and adjusts the
volume.
SQUELCH - Adjusts the scanner's squelch. See "Turning On
the Scanner/Setting Volume and Squelch" in Faxback
Doc. # 38419.
(/\) / (\/) - Enters the direction the scanner will search.
MONITOR - Stores frequencies into and accesses the three
monitor memories. See "Monitor Memories" in
Faxback Doc. # 47683.
S/S LOCKOUT - Skips a specified frequency during a band or
direct (search/skip-lockout) search or locks out
selected channels during scanning.
PROGRAM - Programs frequencies into channels.
BAND - Searches a band you select. See "Frequency Bands"
in Faxback Doc. # 47683.
DELAY - Programs a 2-second delay for the selected
channel.
PRIORITY - Sets and turns on or off priority for a particular
channel.
SCAN - Scans through the channels.
MANUAL - Stops scanning to let you listen to a monitor
memory or directly enter a channel number.
1-9, HOLD/0 - Each key has a single-digit label and the 1-3 keys
also have a range of numbers. Use the digits on
the keys to enter the numbers for a channel or a
frequency. Use the range of numbers above the key
(21-30, of example) to select the channels in a
channel-storage bank. See "Channel-Storage Banks"
in Faxback Doc. # 47683. Also, pressing HOLD
during a search pauses the scanner.
CLEAR/. - Clears an incorrect entry, or enters the decimal
point when you enter a frequency.
E - Stores frequencies into channels. See "Manually
Storing Frequencies into Channels" in Faxback Doc.
# 38419.
WEATHER - Scans the seven preprogrammed weather channels.
A LOOK AT THE DISPLAY
The display has indicators that show the scanner's current operating mode.
A good look at the display will help you understand your scanner.
M - Appears with a number (1-3) to the right to show which
monitor memory you are listening to.
B - Appears with a number (1-3) to the right to show which
channel-storage banks are turned on for scanning. See
"Understanding Banks and Bands" in Faxback Doc. # 47683.
P - Appears when you tune to a priority channel.
CH - Appears with a number (1-30) to the left to show which of
the scanner's 30 channels it is tuned to.
SCAN - Appears when you scan channels.
MAN - Appears when you manually select a channel.
PGM - Appears when you program the scanner.
PRI - Appears when the priority feature is turned on.
L/O (Lockout) - Appears when you skip a channel or frequency, when you
manually select a channel or frequency that is locked out
or skipped, or when a frequency is stored in search skip
memory during a direct search or band search hold.
DLY - Appears when the scanner is scanning and stops at a
channel, or during a search when you have programmed a 2
second delay.
WX (weather) - Appears when the scanner is searching the weather band.
(/\) / (\/) - Indicate the search direction during a search.
b - Appears instead of the channel number during a band search
d - Appears instead of the channel number during a direct
search.
H - Appears during a band search hold.
h - Appears during a direct search hold.
(LB/eb 5/15/98)
Privacy Policy