UN-1650 OmniPack Camcorder Replacement Battery
(230-0303) Preparation Faxback Doc. # 48368
Use only the charger specified for this battery. Before using the battery
pack, please read instructions.
1. Charge before using battery
The battery is not sold in a charged condition. To charge the
battery, refer to the instructions included with the charger.
2. Set Rotator Switch
The battery contact on the camcorder side must be rotated to fit a
SONY style (S+) or Panasonic style (P+) system, depending on the type
of camcorder used.
WARNING: Rotator MUST snap into "S+" or "P+" position, NOT anywhere in
between. Failure to comply may cause poor battery performance
and/or battery pack may lock permanently to camcorder.
SONY System
Push the button (marked with arrow) and align the "S+" with the /\
indicator mark.
Panasonic System
Push the button and align the "P+" with the /\ indicator mark.
3. Using the Charge Indicator Switch
Note the charge indicator switch on the top edge of the battery pack.
This is a manually operated switch to remind the user of which
batteries need to be charged. When the battery is exhausted, slide
the switch so that the circle appears. After charging, slide the
switch so that the circle is no longer visible.
(/eb 6/18/98)
Privacy Policy