Nickel-Cadmium Battery Charger
(230-0133A)                Operation            Faxback Doc. # 49372

1.  To charge two nickel-cadmium batteries, install the batteries into one
    chamber as indicated by the polarity symbols (+ and -) marked inside
    the chamber.  To charge four nickel-cadmium batteries, install two
    batteries into each chamber as indicated by the polarity symbols (+
    and -) marked inside the chambers.

2.  Plug the charger into a standard AC outlet.  The red LED(s) above the
    chamber(s) light while the batteries charge.

3.  When the batteries finish charging, remove the charger from the outlet
    and then remove the batteries from the charger.

    Note:  It takes 14 hours to fully charge the batteries.

(LB/eb 8/21/98)

Privacy Policy