20-Hour 9.6V Ni-Cd/Ni-MH Battery Pack Charger
(230-0332)                 Safety                     Faxback Doc. # 51096

Important Safety Instructions

Save These Instructions!

DANGER:  To reduce the risk of fire or electric shock, carefully follow
         these instructions.

This manual contains important safety and operating instructions for your 
charger.  Before using the battery charger, read all the instructions and 
cautionary markings in this manual and on the battery charger, on the 
batteries to be charged, and on the products that use the batteries.

WARNING:  To reduce the risk of injury:

  Charge only Ni-Cd and Ni-MH batteries with this charger.  Other types of
  batteries might burst, causing personal injury and damage.

  Unplug the charger from the AC outlet before attempting any maintenance
  or cleaning.

  Do not disassemble the charger; take it to a qualified service
  technician when service or repair is required.  Improper reassembly may
  result in a risk of electric shock or fire.

  Do not use an attachment not recommended or sold by RadioShack as this
  could result in a risk of fire, electric shock, or injury to persons.

CAUTION:  To reduce the risk of damage:

  Do not expose the charger to rain or excessive moisture.

  Do not operate the charger if it has received a sharp blow, or been
  dropped or damaged in any way.  Take it to a qualified service
  technician for repair.

  To reduce the risk of damage to the AC plug and cord, disconnect the
  charger by pulling the plug rather than the cord.

  Do not use an extension cord.  Its use could result in fire or electric
  shock.

  Do not operate the charger if the cord or plug is damaged.  Have the
  charger repaired.  Never alter the provided AC cord or plug.  If it does
  not fit in the AC outlet, have a qualified service technician install
  the proper outlet.  Improper connection can result in an electrical
  shock.

  Never use the charger as a DC power source for any electrical equipment.

(EB 1/13/99)