4.8/6V Racing Car Nickel-Cadmium Battery Pack Charger
(230-0420)                 Operation                  Faxback Doc. # 51109

Using The Charger

Every battery pack requires a complete charge before use.  Follow these steps to use the charger for the first and each subsequent charge.

1.  Align the arrow on the battery pack with the arrow on the battery
    charger.

2.  Press and slide the battery pack in the direction of the aligned
    arrows until the battery pack clicks.

3.  Plug the charger into a standard AC outlet.  The red charging
    indicator lights.  If it does not light, unplug the charger and check
    to see that the battery is properly installed.

4.  After about 4 hours, unplug the charger from the outlet and remove the
    battery pack.  The red charging indicator turns off.

CAUTIONS:  Do not charge a battery pack for longer than 24 hours.  Over
           charging a battery pack reduces battery capacity.

           The battery pack gets hot during charging.  This is normal.

(EB 1/14/99)