AMX-4 Portable Amplified Speaker System
(400-1407) Operation Faxback Doc. # 56041
Notes: Be sure the audio sources power is off and its volume control is
set to its minimum level.
If the audio source is stereo, the speaker with the built-in
amplifier is the right speaker.
1. Insert the speaker system's 1/8 inch mini plug into your audio
source's headphone jack.
2. Turn on the audio source and adjust the volume to a comfortable
listening level.
3. To turn the amplifier on, press POWER. The red indicator lights.
Note: The system's volume varies with the audio sources volume level.
Use the audio source's volume control to set the volume.
4. Press BASS in for enhanced low frequency response or out for normal
response.
5. Press TREBLE in for enhanced high frequency response or out for normal
response.
6. To set built-in amplifier off, press POWER again.
Note: If the audio source's output power does not exceed 750 mW, you can
use the speakers with POWER set to OFF. Volume will be lower than
if you used the amplifier.
(EB 7/23/99)
Privacy Policy