BTX-128 2-Channel 1-Watt UHF Business Band Transceiver w/CTCSS
(190-1207)                 Operation                  Faxback Doc. # 63813

Notes: You can only communicate with another transceiver that is using the
       same channel and/or the same quiet tone code as your transceiver.

       Your transceiver's range varies depending on factors such as
       position, terrain, and battery condition. Buildings absorb
       transmitted signals and, if they contain metal, might completely
       block the signals.  Trees and heavy cloud formations have a similar
       effect, though not as severe.

1.  Turn VOLUME/OFF clockwise to turn on the transceiver.  The TX/BATT
    indicator flashes green about once per second.

2.  Rotate CHANNEL A/B to select the preset channel A or B.

3.  To transmit, hold down PTT.  Then hold the transceiver about 3 inches
    from your mouth and speak slowly in a normal voice.  The TX/BATT
    indicator lights green. Release PTT when you finish your transmission.

    Note: If you hold down PTT for more than 2 minutes, the transceiver
          automatically stops transmitting and sounds an alert tone.  The
          TX/BATT indicator flashes green.

4.  To hear everything that happens on the channel including weak
    transmissions, press MON.

5.  Turn VOLUME/OFF fully counterclockwise until it clicks to turn off the
    transceiver.

(EB 1/17/1)

Privacy Policy