PRO-93 (200-0523) and PRO-95 (200-0525) Tutorial: How to Program Motorola Trunking Frequencies

The only difference between the PRO-93 and the PRO-95, is the number of channels each has; the PRO-93 having 300 channels and the PRO-95 having 1000. The method of programming for each is the same.

This is a tutorial for programming Motorola Type II trunking frequencies into your PRO-93 or PRO-95 scanner. For our example, we are storing the frequency 867.7125 for the Motorola system.

For additional information on these products, see the links below:

Step 1: Select the Bank



Press PGM and press (or hold down) the up and down arrow keys to select the bank. In our example we have selected Channel 01.



Step 2: Enter the Trunked Programming Mode



Press TRUNK to enter the Trunked Programming Mode.



Step 3: Select the Mode



Press MODE until MOT for the Motorola system appears. This sets the talk group ID decoding method to be used for the bank.



Step 4: Enter the Program Mode



Press PGM to enter the program mode.



Step 5: Enter and Stor the Desired Frequency



Use the number keys to enter the desired trunking frequency (including the decimal point). Press ENTER to store the frequency. In our example we entered 867.7125 as the frequency.



Step 6: Enter Additional Frequencies



Press PGM or the up arrow key to access the next open channel. Enter the desired frequencies.



Step 7: Start Trunked Scanning



Press SCAN to start scanning.

Back to top