DX-375  (200-0212)            Features                 Faxback Doc. # 8181

Your Realistic DX-375 AM/SW/FM-Stereo PLL Synthesized Receiver lets you
choose from a wide variety of broadcasts on FM, AM, and SW (shortwave)
bands.  The 12 international SW bands let you tune in to the news and
other programs from such sources as the British Broadcasting Company,
Radio Cairo, and Radio Moscow, bring the voices of the world to you.  The
lightweight, compact receiver lets you take it almost you go.

Its special features include:

     Phase-Locked Loop (PLL) - ensures accurate tuning.
     Synthesized Receiver

Large, Fast-Response Display - shows the band, frequency, wave length
                               (for SW), memory, battery, and other
                               indicators.

               Memory Tuning - stores up to 30 frequencies in each band)
                               so you can easily tune to your favorite
                               stations.

        Direct-Access Tuning - directly tunes to the desired frequency
                               when you enter the frequency on the keypad.

               Search Tuning - searches up or down the band for the next
                               available station.

                 Memory Scan - scans the stored frequencies in each band's
                               memory.

        LED Tuning Indicator - lights when the receiver tunes to a signal.

      Shortwave Quick Select - allows you quick access to any of the 12
                               shortwave broadcast bands.

                    Key Lock - prevents you from accidentally turning the
                               receiver on or off, changing the band o
                               frequency, or changing other front-panel
                               controls.

                 Sleep Timer - lets you set the receiver to turn off after
                               60 minutes so you can fall asleep as you
                               listen to the receiver.

            DX/Local Control - helps to reduce distortion of broadcasts.

              Headphone Jack - lets you connect optional stereo headphones
                               so you can listen privately and hear FM
                               broadcasts in stereo.

         Three Power Options - let you power the receiver with internal
                               batteries, standard household AC power
                               (using an optional AC adapter), or DC
                               vehicle battery power (using an optional DC
                               adapter).

                Tone Control - lets you set the receiver to accentuate
                               high or low frequency sounds.

               Memory Backup - keeps the programmed stations in your
                               receiver's memory for up to 1 hour without
                               batteries.

       Frequency Step Switch - lets you set the correct frequency step for
                               different countries.

               Folding Stand - securely positions the receiver at an
                               angle.

Because this product is so versatile, please take a few minutes to review
this manual before you proceed.

LOCKING THE CONTROLS

The lock feature prevents you from accidentally turning the receiver on or
off, changing the band or frequency, or changing other front-panel
controls.  You an still adjust VOLUME, TONE, and SENSITIVITY.

To lock the controls, set LOCK/IN to IN.  LOCK appears on the display.

To unlock the controls, set LOCK/IN away from IN.  LOCK disappears from
the display.

USING THE SLEEP TIMER

The sleep timer sets the receiver to turn off after 60 minutes so you can
fall asleep as you listen to the receiver.

To use the sleep timer, press SLEEP.  SLEEP appears on the display.

After 60 minutes, the receiver turns off.  To turn off the receiver
sooner, press POWER.

USING THE SENSITIVITY SWITCH

If you are listening to a strong FM, AM, or SW station, and the sound is
distorted, set SENS to LOCAL.  For normal or weak stations, set SENS to DX
(distant).

(ALL-02/27/95)

Privacy Policy