                  *** INSTALLATION ***

1)  From either Program Manager or File Manager, select the RUN
    command under the FILE menu and type b:\setup 

    Follow the instructions on the installation program.  You will
    be prompted for a destination directory.  If the destination 
    directory does not exist on your hard disk, it will be created
    for you.  

2)  When the installation is complete, start the program by 
    double clicking on the "RF Vision" icon in the RF Vision
    program group.  


                *** SYSTEM REQUIREMENTS ***

    386 or higher - will not run on 286.

    Microsoft Windows Version 3.1  
       (version 3.0 does not support Multimedia)

    Sound Card - any windows compatible Stereo Sound card e.g.

    Science Workshop's RF Spectrum Analyzer hardware


                 *** TROUBLESHOOTING ***

    If you are installing a Sound Card in your system, follow
    the manufacturer's installation instructions for the card. 
    
    After installing the card, run the "Drivers" option under
    "Control Panel" and select the appropriate driver for your
    board (See Windows Users Manual for further details).  You
    will be required to restart windows before the new driver
    is available.

    Verify that the Sound Board is operational by running "Sound
    Recorder" from the "Accessories Group".  If not, then verify
    your hardware and driver are installed correctly.

    Do you have a sound source plugged into the card?  Is it plugged
    into the correct jack (it is easy to get the wrong one).

    Some sound cards (e.g. Media Vision's Pro Audio Spectrum 16) come 
    with a "mixer" utility which must be running before the sound
    card will function.  Check your sound card documentation. 

    
Early Sound Blaster 16 Drivers:

    Problems have been experienced with early versions of the 
    sound blaster 16 drivers.  Make sure that the datestamp on
    the sb16snd.drv file (windows/system directory) is 9/7/93 or
    later.  You can download the latest driver set from 
    Creative Lab's BBS at 1-405-742-6660. 
