Icom R1500 10.7 Mhz IF-output and UN-blocked cellphone-bands

From: <cont..._at_yahoo.co.uk>
Date: Fri, 24 Mar 2006 16:35:13 -0800

For your Icom PCR-1500 information you may want to check:

http://groups.yahoo.com/group/ICOM-IC-R1500

If you need a 10.7 Mhz IF-output on the spot
i can do it for you at 200 US$ (excl transport)
Problem might be that i'm in Europe,
instead i could supply a new one that
i buy here and add the 10.7 Mhz output to it
and then send it to you.

That would give you 2 other (free) advantages namely:


1)

It will be 100 % open...no cellular blocks
it seems to me that as a sweeper you want/need it all.
Someone just posted that the US version has at least
one block namely 867-896 MHz...there might be more.
As a result you wont be able to detect/receive cellphone-bugs

That blocking policy is far outdated since the phones are digital
and mostly encrypted anyway...but it's still there
Above blocked band also contain a whole lot of wireless-mics
remote-controls..etc


2)

Better shielding,filtering,less spurii and increased electrical-safety
according to tougher European standards.



If you want i could also add a 450 Khz output to it
wich could be usefull for other things like for example subcarrier
demodulation.

Adding additional outputs is more then just adding a wire
..if done bad it will cause additional birdies on your scanner
..if not buffered it might zap the IF-signal and cause other problems.


contranl

http://www.tetrascanner.com
http://groups.yahoo.com/group/DIGITAL2WAYRADIO
http://groups.yahoo.com/group/gsm-scanner
http://groups.yahoo.com/group/traffic-cams
http://groups.yahoo.com/group/iPod-video
http://groups.yahoo.com/group/ICOM-IC-R1500
Received on Sat Mar 02 2024 - 00:57:21 CST

This archive was generated by hypermail 2.3.0 : Sat Mar 02 2024 - 01:11:45 CST