Can the air condicioned receive the signal from the PIR relay? I suppose that is the problem, because that PIR has a relay (NC normaly closed) that you can use.
Anyway ... contact the Securitas Systems office close to you :>
FM
----- Mensagem Original -----
De: James Brown <epau..._at_yahoo.com>
Data: Segunda-Feira, 27 de Agosto de 2007, 18:21
Assunto: [TSCM-L] {1903} Motion Detector
> Greetings, the motion detector is made by Honeywell model: IS-
> 215T You can drop the model# in the Google for a spec sheet. It
> has a tamper switch, high/low sens, enable/disable led indicater.
> The motion detecter in my room had the led indicater off, ( I
> switched it on) and set the sensitivity switch to high. It's a PIR
> type. No connections going to the HVAC unit! The connecter block
> has the following, 12VDC _at_10ma,16VDC_at_90ma,30VDC_at_0.5A. Plus 2
> terminals with no markings. All had different colored wires
> attached. The heat/air conditioner is a thru the wall unit, with a
> internal thermostat. It is a Amana unit. Would like to know what
> it's used for. Thanks
>
>
>
>
>
> 3
>
>
>
> ____________________________________________________________________________________
> Be a better Heartthrob. Get better relationship answers from
> someone who knows. Yahoo! Answers - Check it out.
> http://answers.yahoo.com/dir/?link=list&sid=396545433
> >
>
_______________________________________________________________________________________
Ha quem faca tudo para ter ate 6 000 Euro...
Saiba mais em
http://www.iol.pt/correio/rodape.php?dst=0707182
Received on Sat Mar 02 2024 - 00:57:26 CST