WaveMANAGER/AP
The new Configuration and Diagnostic tool for WavePOINT-II access points.
See WavePOINT-II Software Release 1.04
(dated January 23, 1998)
WaveMANAGER/Access Point enables you to configure WavePOINT-II units
via a wired or wireless interface, or even via the internet using IP addressing
The monitor functions of WaveMANAGER/AP enables you to monitor bridging
performance of both WavePOINT-II
AND first generation WavePOINT access
points.
The Configuration Menus allow for controlling the:
- WaveLAN interface(s)
- Bridge Parameters
(e.g. Protocol Filtering, Storm Thresholds and Spanning Tree Configurations)
- IP parameters, such as IP address, subnet masks, default routers or
TTL's
- SNMP parameters such as, SNMP IP access control, Trap Host definition,
System Contact,setup
- Access Control at the wired or wireless interface
The Monitor options allow for controlling the:
- WaveLAN interface(s)
- Bridge Parameters for both Ethernet and WaveLAN interfaces
(e.g. Unicast packets in/out, Bytes in/out, collisions, packets with low
or excellent Signal to Noise Ratio
- MIB II statistics
- SNMP statistics
- WaveLAN statistics
NOTE: WaveMANAGER/AP runs only on computers with the Microsoft
Windows 95 or Windows NT operating system.
Back to list of utilities
WaveMANAGER/CLIENT, (v1.17)
The WaveLAN Diagnostic tool for Windows 95 & Windows NT environments!
wmclient.exe (200k bytes, dated May 02, 1997)
WaveMANAGER/CLIENT enables you to:
- Perform a Link Test
(e.g. to diagnose a wireless connection between two wireless stations)
- Run the Site Monitor
A tool designed to determine or optimize placement of your WavePOINT access
points.
- Use the Access Control Manager
A tool to create or edit a list of 'Access Control Tables'.
Access Control Tables are typically used in combination with the configuration
utilities for WavePOINT access points.
to control wireless access to the WavePOINT units.
View the Web-Site Based Demo!"
Back to list of utilities
WaveMONITOR,
v2.12
A MS-DOS based diagnostic utility to verify network environments for roaming
applications. WaveMONITOR allows you to verify the communications path
with all WavePOINT access points within range of a monitoring station.
NOTE: WaveMONITOR runs on WaveLAN/PCMCIA equipped stations only!
wmntr212.exe (87k bytes, dated November 25, 1996)
Back to list of utilities
WaveLAN Point-to-Point
diagnostics, v4.19
A MS-DOS based diagnostic utility to verify the communications quality
between two WaveLAN stations or one WaveLAN station and a WavePOINT access
point. ptpd419.exe (67k bytes, dated November 25, 1996 )
Back to list of utilities
WaveLAN Frequency
Select Utility , v1.18
A MS-DOS based utitlity that can be used to check or change the current
operating frequency of a WaveLAN 2.4 GHz card.
wfreq118.exe (56k bytes, dated November 25, 1996)
Back to list of utilities
WavePOINT
Access Control Table Manager, v2.35
A MS-DOS based utitlity that can be used to create or update the Access
Control Table used by the WavePOINT. The Access Control Table identifies
the MAC addresses of WaveLAN stations authorized to access the WavePOINT.
wpacc235.exe (87k bytes, dated November 25, 1996)
Back to list of utilities
CIS update
utility for WaveLAN/PCMCIA cards, v1.02
If you encounter difficulties installing an earlier version of the WaveLAN/PCMCIA
card in Windows NT or Windows 95 (i.e. Windows does not recognize the card,or
does not detect new hardware), you can use this MS-DOS based utility to
update the Card Information Structure (CIS) of your WaveLAN/PCMCIA card.
cisup102.exe (15k bytes, dated November 25, 1996)
Back to list of utilities
Remote Point-to-Point
Diagnostics v1.00 (Beta)
This utility enables you to verify Point-to-Point links between two stations
or two WavePOINT access points from one (central) location in the wireless
network environment. This utility may help you in diagnosing the commuications
quality of wireless Point-to-Point links between two buildings using WavePOINT
access points and external directional antennas.
rptp.exe (145k bytes, dated June 29, 1995)
WaveLAN Driver Software
Client Drivers
Miniport driver
for WaveLAN/ISA and WaveLAN/PCMCIA Cards v1.17
This is the latest version of the WaveLAN NDIS Miniport driver for
installing WaveLAN adapter cards in Microsoft Windows 95 and Windows
NT environments.
This driver is required to run the WaveMANAGER/CLIENT diagnostics program
(v1.17)
mp117.exe (58 KB, dated June 13, 1997)
WVLAN05
v3.06
DOS ODI driver for WaveLAN/PCMCIA and WaveLAN/ISA cards
wvlan05.exe (40k bytes, dated March 06 1996 )
Apple
Power Book
WaveLAN driver to install WaveLAN/PCMCIA Card in:
- Apple Powerbook 5300 series MacOS versions 7.5.2., 7.5.3, 7.5.5
- Apple Powerbook 190 MacOS versions 7.5.2, 7.5.3, 7.5.5 and
- Apple Powerbook 1400 series MacOS version 7.5.3
apr1301i.hqx (1.1 Mb, dated October 22, 1996)
WaveLAN/MC DOS/ODI
driver v1.06
Last version of DOS/ODI driver for WaveLAN/MC cards
amdosodi.exe (51k bytes, dated 04/13/94 )
WaveLAN/MC NDIS
drivers v2.07
Last version of NDIS driver for WaveLAN/MC cards in OS/2 and DOS
amndis.exe (68k bytes, dated 04/13/94 )
Server Drivers
WaveLAN/ISA
Server driver v.1.04 for Netware v.3.12/v.4.x
This driver can be used with both full-size and half-size WaveLAN/AT
or WaveLAN/ISA 915 MHZ cards.
For WaveLAN 2.4 GHz products it can also be used with both full-size and
half-size WaveLAN/AT or WaveLAN/ISA cards.
This WaveLAN Server driver also supports Netware v3.12 when used with ETHERTSM.NLM
as supplied by Novell
isanw104.exe (20k bytes, dated 10/10/96 )
Unix Drivers
UNIX V.4 MP-RAS
ILD MAC, v. 02.03.00.11
WaveLAN driver for NCR UNIX SVR4:
- v2.3.x.x and up
- v2.2.x.x and up
- v2.0.2.x and up
ild2311.exe(97k bytes, dated 04/01/96 )
UNIX V.4 MP-RAS
ILD MAC, v. 02.03.00.00
WaveLAN driver for NCR UNIX SVR4:
- v3.0.x.x and up
- v2.3.x.x and up
- v2.2.x.x and up
- v2.0.2.x and up
ild2320.exe (112k bytes, dated 02/22/96 )
UNIX V.4 MP-RAS
ILD MAC v. 2.02.00.00
WaveLAN driver for MicroChannel card in NCR UNIX SVR 4 v2.2.x.x and up,
v2.0.2.x and up
This driver is for WaveLAN MC cards only!
ild2200.exe (75k bytes, dated 09/16/94 )
UNIX V.4 MP-RAS
ILD MAC v. 1.04.01.04
WaveLAN driver for MicroChannel card in UNIX v.4 v1.04.xx.xx, NCR UNIX
SVR 4 v1.4.x.x and up
ild1414.exe (60k bytes, dated 09/16/94 )
Back to software list
UNIXWARE v.1.1
wluw1100.exe 1.1 (52k bytes, dated 05/15/95 )
WaveLAN/ISA
driver for SCO UNIX v.1.02.00.00c (GAMMA Release)
This driver version has been designed to work with the following SCO UNIX
Operating Systems:
- SCO UNIX SVR3.2 version 5.0
- SCO UNIX SVR3.2 version 4.2
wlsc120c.exe, (110k bytes, dated March 19, 1997)
Back to software list
Back to software list
Handling Self-Extracting ZIP Files
- MS-Windows: Use 'Winzip' to open and extract
the .exe file.
Make sure you have the option 'Use Directory Names' selected, to
re-build the directory tree that is required for the installation process.
(32-bit versions of Winzip call this option 'Use Folder Names').
If you do not have the Winzip program, open a MS-DOS box and follow
the procedure as described for MS-DOS.
- MS-DOS: Move to the directory where you
saved the .exe file. To extract the compressed software under MS-DOS,
type the filename at the DOS prompt, followed by the command line parameter
-d
For example:
C:cd temp
C:\temp\WP450_1.EXE -d
If you would like to create new installation floppy disks, add the parameter
a:
For example:
C:\temp\WP450_1.EXE -d a:
The command line parameter -d will re-build
the directory tree that is required that is required for the installation
process.
The parameter a: will have the file extracted
to a floppy disk in drive A:\ of your computer.
Winzip is a registered trademark of Niko Mac Computing,
Inc.
MS-DOS and MS-Windows are registered trademarks of Microsoft Corporation
Back to software list
Troubleshooting File Transfer
If you experience difficulties downloading files, please verify that
your Web browser is configured to handle EXE and TXT files correctly. Many
browsers require special action be taken for non-viewable file types such
as EXE.
| Netscape |
Change the settings in the Options/General Preferences/Helpers section. |
| MS-Internet Explorer |
- Use the right mouse button to click on the link
|
|
- choose Open and Save-As".
|
| Spry Mosaic |
Enable the Load to Disk Mode from the Options menu. |
Back to Software list